About This

• Black Silicone Weather Stripping – Sleek Black for Large Gaps, The 1.8in black silicone seal matches dark-colored doors and windows, offering aesthetic appeal and effective sealing.
• Door Seal Strip For Door Frame – Blocks Cold Air, Designed for gaps up to 1.2 inches, it effectively blocks drafts and dust to keep your home warm.
• Weather Stripping Window Seal – Thick Silicone for Extreme Cold, Made from 100% thick silicone, it remains flexible in freezing conditions and won’t crack or peel.
• Strong Adhesive for Cold Weather – The reinforced adhesive ensures the seal stays firmly attached, even in extreme winter cold, Versatile for Various Applications – Suitable for doors, windows, sliding glass doors, garage doors, and large gaps.
• Energy Efficient, Saves Heating Costs – Helps reduce heat loss, improves energy efficiency, and saves on heating costs during winter, Flexible Installation, Easily cut to size and install on doors, windows, and more

Overview

• Brand : wigtda
• Material : Silicone Rubber
• Color : Black
• Recommended Uses For Product : Additional Installation Tips: For corners and curves: If you're sealing around a window or door with curves or corners, carefully align the seal along the contour and press firmly to prevent any gaps. Temperature considerations: In colder climates, installation works best at temperatures above 50°F (10°C). If you must install the seal in colder weather, always warm the adhesive as mentioned in Step 4 to ensure a secure bond. Wait before testing: Allow the adhesive to bond for at least 12-24 hours before testing the door or window to ensure the best performance., Step 2: Clean the Installation Surface Clean and dry the door or window frame where you will apply the weather stripping. Remove any dirt, dust, grease, or moisture from the surface to ensure strong adhesion. For best results, use a mild detergent or rubbing alcohol on a clean cloth to wipe the area. Note: If the surface is not thoroughly cleaned, the adhesive may not stick properly, leading to peeling or reduced effectiveness., Step 3: Measure and Cut to Fit Unroll the weather stripping and measure the length you need for the door or window. Use sharp scissors or a utility knife to cut the seal to the appropriate length. It's better to slightly overestimate the length and trim off the excess after applying., Step 4: Apply the Seal Peel off the adhesive backing slowly, starting from one end. Align the seal with the edge of the door, window, or frame. Press down firmly as you move along, ensuring there are no air bubbles or gaps between the seal and the surface.Note: If you're installing the seal in cold weather (below 50°F/10°C), use a hair dryer to warm the adhesive slightly before applying. This helps the adhesive stick better in low temperatures., Step 5: Trim Excess and Final Pressing After applying the seal, trim any excess material with scissors to ensure a clean and flush fit. Press down again on the entire length of the seal to make sure it's securely attached to the surface. For better adhesion, you can press firmly with your fingers or a soft cloth., weatherproofing doors, windows Additional Installation Tips: For corners and curves: If you're sealing around a window or door with curves or corners, carefully align the seal along the contour and press firmly to prevent any… See more
• Number of Items : 1