About This

• CHECK YOUR MODEL BEFORE YOU ORDER - This USB-C temperature probe cable fits the MOCREO H5Lite Hub, NS1, NS1W, MS1, LS1. It does not fit ST4, ST5, ST9 or ST10 - those use a different, cylindrical probe, so please check the model on your unit first.
• YOUR MONITOR PROBABLY ISN'T BROKEN - YOUR PROBE IS - The part that actually measures temperature sits in the tip of the probe, and the tip is the one piece that lives in the cold, gets pinched by the door, or chewed by a pet. So when readings start drifting or dropping out, fitting a new temperature probe usually brings the monitor back - you rarely need to replace the whole unit.
• PLUG IT IN AND YOU'RE DONE - Unplug the old one, plug this replacement temperature probe into the USB-C port, and it starts reading. No re-pairing, no app setup, no recalibration - which matters when the freezer is already warming up and you just need it working again.
• THE DOOR STILL CLOSES PROPERLY - At 1.3 mm, the flat cable on this refrigerator temperature probe slips through the 1.5 mm gap built into a fridge door gasket, so the seal keeps its grip instead of being propped open by a round cable - no cold leaking out, no frost line along the door, no gasket left deformed.
• BUILT FOR THE COLD AND THE WET - The stainless steel tip on this waterproof temperature probe reads from -40°F to 221°F within ±0.9°F, so it holds up in a deep freezer, a walk-in cooler or a commercial fridge. In the box: one 4.92 ft probe cable.

Overview

• Brand : MOCREO
• Connector Type : USB Type C
• Cable Type : USB
• Compatible Devices : MOCREO H5-Lite Hub
• Compatible Phone Models : Likely compatible with modern smartphones with USB C port, specific models not listed